Merida 2020 eOne Sixty 9000

Merida 2020 eOne Sixty 9000

Merida 2020 eOne Sixty 9000

Loading product options

CATEGORY HIGHLIGHTS

eONE-SIXTY CFA FRAME

Carbon front triangle with integrated battery technology, paired with 6016 rear end with aggressive enduro/trail geometry and 150 mm rear wheel travel - Shimano STePS E8000/E7000 motors allow for short chain stays delivering agility. Internal cable guide for rattle free running. Full carbon motor bracket creates an integrated appearance of the motor into the frame as well as provides an extremely strong connection between frame and motor.

SATELLITE POINTS

The bike features a perfectly positioned satellite on/off switch, at the head tube end of the top tube, and a well-protected satellite charging port, positioned in the main frame triangle, just above the motor. 

INTERNAL BLOCK

First introduced in our 2015 NINETY-SIX, the new version of the 'Internal Block' is incorporated directly in the frame and prevents the fork crown from hitting the carbon frame in case of a crash or an extreme steering angle. As an extra protection, there are additional rubber bumpers on the frame to avoid any frame damage from the fork crown.

THERMO GATE

Specifically located openings on the carbon eONE-SIXTY models near the head tube which work like a chimney and allow the warm air to dissipate to guarantee the optimum operating temperature of the internal battery. The 'Thermo Gate' enables the battery to perform at its best, in any condition.

ENERGY GUARD

A two-component battery cover, which offers perfect protection for the internal battery. The softer (outer) layer reduces noises, seals the downtube perfectly and absorbs hits from trail debris easily, while the harder (inner) layer ensures that the battery does not get damaged and gives it the structural shape. All critical parts like the rubber strap and o-rings for perfect fitting can be replaced.

WATER CARRIER

Due to the integrated battery, we were able to offer water bottle cage fixing points, allowing bottles of up to 0.75l to be fitted into the main frame triangle. Great if you want to keep your back free of hydration packs and backpacks. 

CLEVER WHEELS

To give the eONE-SIXTY precise steering, fantastic ‘rolling over obstacles’ behaviour yet maximum traction, we have combined a 29er front wheel with a 2.5" tyre and a 650B rear wheel, equipped with a slightly wider 2.6" tyre. The perfect combination of precision, playfulness and traction. 

BOOST THAT RIDE

‘Boost’ standard front & rear. The extra 6 mm rear hub and 10 mm front hub spacing in comparison with conventional hubs brings the width up to 148 mm / 110 mm and gives the eONE-SIXTY wheels noticeably more stiffness and strength.

 

Frame
eONE-SIXTY CFA: intube: 504WH: 150 STR
Sizes
XS-S-M-L-XL
Fork
FOX 36 Factory E-Bike+: Air: 160 STR: Tapered: 51mm fork offset
Rear shock
Fox Factory Float DPX2
Drive unit
Shimano E8000: 70Nm
Battery
Shimano E8035: 504Wh
Battery charger
Shimano EC-E6000
Display
Shimano SC-E8000
Switch
Shimano SW-E7000-L
Rear derailleur
Shimano XT RDM8100 Shadow+
Shifters
Shimano XT (1 x 12)
Brake-front
Shimano XT: 4 piston
Brake-rear
Shimano XT: 4 piston
Rotor-front
Shimano RT-MT900: 203 mm
Rotor-rear
Shimano RT-EM910: 203 mm
Chainwheel
Shimano CRE80-12-B: 34 ATC
Crank
Shimano M8050: hollow
Chain
CNM8100
Cassette
Shimano M8100: 10-51 ATC: 12
Pedals
VP: VPE-537
Handlebar
MERIDA Expert eTR: 780 WHB: 20 RHB
Handlebar stem
MERIDA Expert eTR: 35 DSH: 0 ASD
Head set
Merida 1901
Seat post
MERIDA EXPERT TR: 30.9 DSP: 0 SB: XS: 125 SPT - S/M: 150 SPT - L/XL 170 SPT:
Saddle
MERIDA Expert CC
Hub-front
attached
Hub-rear
attached
Axle-front
attached
Axle-rear
MERIDA COMP TR: including removeable lever, 6/4mm allen key